Suitcase fusion 6 cannot activate or deactivate fonts

SUITCASE FUSION 6 CANNOT ACTIVATE OR DEACTIVATE FONTS DRIVER
SUITCASE FUSION 6 CANNOT ACTIVATE OR DEACTIVATE FONTS SERIES

See Problems and Solutions for possible causes and solutions to the problem. If the self test does not print properly, there is a problem with the printer.

(Be sure to use a shielded interface cable.)

SUITCASE FUSION 6 CANNOT ACTIVATE OR DEACTIVATE FONTS DRIVER

If the self test results are satisfactory, the printer is working properly and the problem probably results from your printer driver settings, application settings, computer, or interface cable. Running the printer's self test helps you determine whether the printer or the computer is causing the problem: If a problem occurs while printing, an error message appears in the Progress Meter window. The printer beeps once if you press a control panel button when the corresponding function is not available.Д®PSON Status Monitor 3 provides status messages and a graphic display showing the current status of the printer.

SUITCASE FUSION 6 CANNOT ACTIVATE OR DEACTIVATE FONTS SERIES

= short series of beeps (three beeps), = long series of beeps (five beeps) If the error recurs, contact your dealer. Turn off the printer and leave it off for several minutes then turn on the printer again. Wait for a few minutes the printer resumes printing automatically once the print head cools. To clear the paper jam, see Clearing Paper Jams. The printer feeds the paper to the standby position. Tear off the printed page at the perforation then press the Load/ Eject button. Press the Load/Eject button to eject the sheet.Д¬ontinuous paper is not fed to the standby position. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper then move the paper release lever to the desired position.ДЄ single sheet of paper is not fully ejected. Set the paper release lever to the position for the paper source you want to use. The paper release lever is set to the wrong position. See Loading Continuous Paper or Loading Single Sheets for instructions on loading the type of paper you want to use. Remove your paper and reload it correctly. Then press the Pause button the Pause light goes off and the printer starts printing. Load paper in the printer or select a different paper source the Paper Out light goes off. No paper is loaded in the selected paper source.

If you cannot fix your printer problem using this table, see Problems and Solutions. If your printer stops working and one or more control panel lights are on or flashing or the printer beeps, use the following table to diagnose and fix the problem. You can identify many common printer problems using the lights on the control panel. To solve a problem, you may need to cancel printing. If you have a specific problem relating to print quality, a printout problem not related to print quality, or a paper feeding problem, or if the printer does not print at all, refer to the appropriate section in this chapter. The information that you need to diagnose and solve most common problems is provided by the printer's control panel, EPSON Status Monitor 3, or by printing a self test or Hex Dump. If your problem is not USB related, troubleshooting printer problems is best handled in two easy steps first diagnose the problem, then apply likely solutions until the problem is fixed. For problems that may be related to USB connections, see Correcting USB Problems for details.

Suitcase fusion 6 cannot activate or deactivate fonts